51 49 080 Removing And Installing/Replacing Cover For Loading Sill (On Rear Lid Lower Section)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim for rear lid lower section . See 51 49 090 REMOVING AND INSTALLING/REPLACING PANEL FOR REAR LID LOWER SECTION .

Lever out cover (1), release screw underneath and remove handle (2).

Lever out cover (3) and release screw underneath.

Installation:

If necessary, replace faulty drives (1 and 2).

Fig 1: Identifying Cover And Drives

Courtesy of BMW OF NORTH AMERICA, INC.

Release cover (1) at clips (2) and feed out.

Installation:

If necessary, replace faulty clips (2).

Fig 2: Identifying Cover At Clips

Courtesy of BMW OF NORTH AMERICA, INC.