51 43 255 Removing and installing / replacing trim for rear left or right roof pillar (front)

WARNING: Version with head AIRBAG:
Follow safety instructions for working on cars with AIRBAG systems.

IMPORTANT: Do not use any sharp-edged tools to remove trim (risk of damage to head AIRBAG).

Necessary preliminary tasks:

Remove trim for rear roof pillar (rear), refer to 51 43 251 Removing and installing / replacing trim for rear left or right roof pillar (rear)

IMPORTANT: Lever out expander rivet heads (1) only over groove (3) on lower section (2). If necessary, turn lower section (2) with groove (3) towards front.

Fig 1: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release clip (4) and remove trim (5) towards inside/top.

Installation:

If necessary, replace defective grommet (1).

Fig 2: Replacing Defective Grommet

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clip (1).

Bores (2) and insulating mat (4) of trim (3) must not be damaged.

Fig 3: View Of Trim Components

Courtesy of BMW OF NORTH AMERICA, INC.