51 21 330 Removing and installing/replacing window cavity cover strip on inner front door

Remove front door trim panel. Refer to 51 41 000 Removing and installing left or right front door trim panel .

Detach cover (1) from seal (2) and from front door (adhesive tape).

Fig 1: Detaching Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Remove window cavity cover strip (1) towards top.

Installation: 

If necessary, remove faulty clips (2) from inner door panel and replace.

Fig 2: Removing Faulty Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Coat window cavity cover strip (1) with water prior to installation.