51 34 211 Replacing rubber guide for rear left or right door window
WARNING: This page is about a different variant/trim than selected.
Remove window cavity cover strip on outside of rear door. Refer to 51 22 300 REMOVING AND INSTALLING/REPLACING WINDOW CAVITY COVER STRIP ON REAR DOOR ON LEFT OR RIGHT .
Remove cover (anti-trap protection) on inside of door window frame. Refer to 51 34 160 REMOVING AND INSTALLING/REPLACING COVER (ANTI-TRAPPING PROTECTION) ON DOOR WINDOW FRAME (REAR DOOR), INSIDE LEFT OR RIGHT .
Remove rubber guide (1).
Installation:
For installation, coat window cavity cover strip (1) with turpentine substitute.
Close door window glass a little.
Push rubber guide (1) onto door window glass and into window guide.
Installation:
Rubber guide (1) must not be damaged in corners (2).