11 51 000 Removing and installing/replacing water pump (M62/S62)
WARNING: This page is about a different variant/trim than selected.
Drain off coolant and dispose of correctly.
Installation:
Vent cooling system and check for leaks,
refer to 17 00 005 DRAINING AND TOPPING UP COOLANT (M62) .
Remove vibration damper,
refer to 11 23 010 REMOVING AND INSTALLING/REPLACING VIBRATION DAMPER (M62) .
Remove thermostat housing,
refer to 11 53 000 REMOVING AND INSTALLING/REPLACING COOLANT THERMOSTAT (M62) .
- Remove pulley.
- Remove coolant hose.
- Unfasten screws.
- Remove water pump.
Installation:
Make sure that sleeves are correctly seated.
Clean sealing faces.
Replace seal.