LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> X5 44i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (AUDIO, NAVIGATION, ANTI-THEFT AND RESTRAINTS - REPAIR INSTRUCTIONS - X5 (3.0i)) >> Video Monitor >> 65 52 043 Removing and installing/replacing housing with drive for on-board monitor (widescreen)

65 52 043 Removing and installing/replacing housing with drive for on-board monitor (widescreen)

WARNING: This page is about a different variant/trim than selected.

Remove complete on-board monitor (widescreen). Refer to 65 52 013 REMOVING AND INSTALLING COMPLETE ON-BOARD MONITOR (WIDESCREEN)  .

Remove panel for on-board monitor (control panel, widescreen). Refer to 65 52 023 REPLACING PANEL FOR ON-BOARD MONITOR (CONTROL PANEL, WIDESCREEN)  .

NOTE: After removing panel for on-board monitor, reconnect housing with drive for on-board monitor to power supply until retaining brackets for monitor panel are fully retracted.