Overview - Clutch Housing

Fig 1: Exploded View Of Clutch Housing

Courtesy of AUDI OF AMERICA, LLC

Clutch Housing
Pinion
- Refer to Pinion, Removing and Installing .
- Refer to DRIVE PINION, DISASSEMBLING AND ASSEMBLING .
- Refer to Pinion, Adjusting .
Alignment Sleeve
- Quantity: 2
Parking Lock Gear
- Refer to OUTPUT GEAR OF THE SPUR GEAR UNIT, REMOVING AND INSTALLING
Spur Gear Unit Output Gear
- Refer to OUTPUT GEAR OF THE SPUR GEAR UNIT, REMOVING AND INSTALLING
Circlip
- Always replace after removing
- Refer to CIRCLIP FOR THE OUTPUT GEAR OF THE SPUR GEAR UNIT, DETERMINING
Oil Guide Shell
- For vehicles without self-locking center differential
- Replace after dismounting the roller bearing for the output shaft
Inner Output Shaft
- For vehicles with self-locking center differential
Bolt
- Quantity: 3
- Always replace after removing
- 5 Nm + 30°
Output Shaft Roller Bearing
- Bearing "H"
- Refer to OUTPUT SHAFT ROLLER BEARING, REPLACING
Bearing Shell
Bolts
- Quantity: 2
- 5 Nm + 30°
Circlip
Input Shaft Needle Bearing
- Bearing "B"
- Refer to INPUT SHAFT NEEDLE BEARING, REPLACING
Guide Sleeve
Seal
- For the input shaft
- Refer to Inner Input Shaft Seal, Replacing .