Front Three-Point Seat Belt, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
Conditions
- If parts of the seat belt system are removed due to an accident, replace the belt system bolts.
- Make sure the connectors are pushed in all the way and that they engage audibly.
-- Insert the automatic belt retractor with the anti-twist mechanism -1- in the mount in direction of -arrow- and tighten the bolt.
CAUTION:
Pyrotechnical components can deploy unexpectedly.
A risk of injury is possible.
- Keep as far away as possible from the pyrotechnic component when switching the ignition on.
-- If the battery was disconnected, perform the required steps after connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Conditions
- After replacing the Left Front Seat Belt Tensioner Control Module -J854- / Right Front Seat Belt Tensioner Control Module -J855-, the control module must be adapted using the Vehicle Diagnostic Tester.