Required Tools And Materials For Removal And Installation

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge - Special Hook (2 pc.) :10-222A/20

Fig 1: Identifying Special Hook (2 pc.)
Courtesy of AUDI OF AMERICA, LLC
Double Suction Lifter :V.A.G 1344

Fig 2: Double Suction Lifter
Courtesy of AUDI OF AMERICA, LLC
Window Removal Set :VAS 861 001A

Fig 3: Idenitying Window Removal Set VAS861001A
Courtesy of AUDI OF AMERICA, LLC
Window Removal Set - Cutting Cord :VAS 861 001/1A
Window Cutter :V.A.G 1561A

Fig 4: Identifying Window Cutter VAG 1561A
Courtesy of AUDI OF AMERICA, LLC
Window Cutter - Scraper (2 pc.) :V.A.G 1561/7+8

Fig 5: Identifying Scraper (15+25 mm) V. A. G 1561/7+8
Courtesy of AUDI OF AMERICA, LLC
Scraper Set :VAS 861 005

Courtesy of AUDI OF AMERICA, LLC
Double Cartridge Adhesive Gun :VAS 5237

Fig 6: Double Cartridge Adhesive Gun (VAS5237)
Courtesy of AUDI OF AMERICA, LLC
Cartridge Heater :VAG 1939 A

Fig 7: Cartridge Heater
Courtesy of AUDI OF AMERICA, LLC
Wedge Set :T10383

Fig 8: Identifying Wedge Set
Courtesy of AUDI OF AMERICA, LLC
Hook Tool :T40207

Fig 9: Identifying Hook Tool T40207
Courtesy of AUDI OF AMERICA, LLC

Materials

Two-Part Window Adhesive Kit :D 004 660 M2 . Refer to ) REQUIRED TOOLS AND MATERIALS FOR REMOVAL AND INSTALLATION.
Primer :D 009 200 02
Applicator :D 009 500 25
One-Part MS Assembly Adhesive :D 172 090 A2 . Refer to ) REQUIRED TOOLS AND MATERIALS FOR REMOVAL AND INSTALLATION.
Cleaning Solution :D 009 401 04
Adhesive Remover :D 002 000 A2
Reinforced Adhesive Tape

Observe the minimum curing time. Refer to MINIMUM CURING TIME FOR BONDED SLIDING SUNROOF .

To process this material, the Double Cartridge Adhesive Gun :VAS 5237 must be used.

For the side trim, Avant