Securing On Engine And Transmission Holder
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate:VW309A
- Engine and Gearbox Bracket:VAS6095A
Procedure
- Hold the transmission with the :VAS6100 . Refer to TRANSMISSION, TRANSPORTING .
-- Attach the :VW309A to the :3311 .
-- Insert the transmission in the :VAS6095A using the :VAS6100 .
- The vents for the transmission housing and final drive must be closed before turning a filled transmission with ATF pan upward on the engine/transmission holder.