Transmission, Transporting
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hook And Support Tool:3311 with Hook And Support Tool - Bolt:3311/1
- Shop Crane:VAS6100
Procedure
- Transmission removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
CAUTION:
Transmission components could be damaged if they are not set down correctly.
- Never place the transmission on the ATF cooler or on the transmission fluid pan.
-- Secure the transmission on the :3311 (use new longer bolts :3311/1 ).
CAUTION:
There is a risk of injury due to the transmission weight transfer.
The possibility for parts of the body to be pinched or crushed increases.
- Only transport the transmission in the way described.
-- Lift and transport the transmission with the :VAS6100 .