Electric Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model preliminary work may be required. Refer to ELECTRIC COOLANT PUMP, REMOVING AND INSTALLING .

-- Remove the bolt -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -1-, remove the coolant hose and push to the side.

-- Place a cloth underneath to catch any escaping coolant.

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamps -3- and remove the coolant hoses.

-- Remove the bolts -1- and the After-Run Coolant Pump -V51- -item 4-.