Electric Coolant Pump, Removing And Installing
WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clip Pliers:VAS6362
Removing
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the bolts -arrows- and remove the front air duct -1-.
-- Remove the bolts -2-.
-- Loosen the hose clamps -arrows- and remove the coolant hoses.
-- Remove the coolant pipes from the fan shroud.
All additional procedures are described. Refer to ELECTRIC COOLANT PUMP, REMOVING AND INSTALLING .
Tightening Specifications
- Refer to OVERVIEW - COOLANT PIPES
- Refer to OVERVIEW - AIR FILTER HOUSING