Electric Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi RS 3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the => Parts Information.
Used coolant cannot be used again.

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .

Additional procedures depending on the model. Refer to ELECTRIC COOLANT PUMP, REMOVING AND INSTALLING .