Overview - Assembly Mounts

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bonded Rubber Bushing, Assembly

Courtesy of AUDI OF AMERICA, LLC

Stop Washer
- Remove before removing the bonded rubber bushings -item 2- OVERVIEW - ASSEMBLY MOUNTS.
- Place on the bonded rubber bushings -item 2- OVERVIEW - ASSEMBLY MOUNTS. Refer to Figure.
"Upper Rear" Bonded Rubber Bushing
- Removing. Refer to Figure.
- Differentiation of "upper rear" and "lower front" bonded rubber bushings. Refer to Figure.
- Installation position. Refer to Figure.
- Installing. Refer to Figure.
"Lower Rear" Bonded Rubber Bushing
- Removing. Refer to Figure.
- Installing. Refer to Figure.
Stop Washer
- Remove before removing the bonded rubber bushing -item 5- OVERVIEW - ASSEMBLY MOUNTS.
- Place on the bonded rubber bushing -item 5- OVERVIEW - ASSEMBLY MOUNTS. Refer to Figure.
"Lower Front" Bonded Rubber Bushing
- Removing. Refer to Figure.
- Differentiation of "upper rear" and "lower front" bonded rubber bushings. Refer to Figure.
- Installation position. Refer to Figure.
- Installing. Refer to Figure.
"Upper Front" Bonded Rubber Bushing
- Removing. Refer to Figure.
- Installing. Refer to Figure.
Rear Final Drive
- Removing and Installing. Refer to OVERVIEW - FINAL DRIVE .