Torque-Splitter: Heat Entry, Read Out
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Only applies to Audi RS3.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure:
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Under Service Procedures > General Procedures and select the menu item Rear Final Drive Energy Entry, Checking .
-- Further follow the program sequence and read out the energy entry.
-- Further follow the instructions in the program.