Vehicle Diagnostic Tester, Connecting
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Vehicle Communication Interface (VCI) :VAS6154
- Or: Diagnosis Interface :VAS 5055
Procedure:
-- Attach the connector from the Vehicle Communication Interface (VCI) :VAS6154 to the diagnostic connection in the vehicle.
-- Turn on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Follow the screen menu to start the desired function.