Sliding And Tilting Mechanism, Removing And Installing, A6: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Prepare the undamaged sunroof frame for installing. Refer to SUNROOF FRAME WITHOUT DAMAGE, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

Observe minimum curing times. Refer to MINIMUM CURING TIME FOR BONDED SLIDING SUNROOF .

-- Perform an adaptation. Refer to Sunroof Motor -V1-, PROGRAMMING .