Side Adjustment at Striker, A7 Sportback
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the nuts -1 and 3-.
-- Move the striker -2-.
- Use the markings on the striker -4- and on the body -5- for the side adjustment.
- During the closing test, the hood must fall from the balance position into the latch and engage completely.
-- Tighten the nuts.
Tightening Specifications
- Refer to OVERVIEW - HOOD