Terminal 40 Wire Junction TV66, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the battery. Refer to Battery A, Disconnecting and Connecting .
A6, A7 Sportback
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING or AIR FILTER HOUSING, REMOVING AND INSTALLING .
Continuation for all vehicles
RS 6 Avant, RS 7 Sportback with parking/auxiliary heater:
-- Disconnect the connectors -2- and free up the wire.
-- Remove the nuts -arrows- using the Socket:T40078 .
-- Remove the parking/auxiliary heater -3- from the rubber bushing -1- and slightly push to the left.
Continuation for all vehicles
-- Release the catch -6-.
-- Open the cover -1- -arrow-.
-- Remove the nuts -3- and -4-, and free up the wires.
-- Remove the bolts -2- and -5-.
-- Remove the Terminal 40 Wire Junction -TV66-.