Bumper Cover, Removing And Installing, A6: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Depending On The Version, The Following Additional Work Is Required:

-- Calibrate the lane change assistance. Refer to Lane Change Assistance .

Note the conditions here for a required calibration of the lane change assistance.

Tightening Specifications

Refer to OVERVIEW - BUMPER COVER, A6
Refer to OVERVIEW - REAR WHEEL HOUSING LINER