Bumper Cover, Adjusting
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .
Procedure
-- Loosen the bolts -1-.
-- Adjust the front bumper cover lengthwise according to the markings -arrow-.
-- Tighten the bolts.
-- Check the gap dimension for evenness, and repeat the adjustment if necessary.
Tightening Specifications
- Refer to OVERVIEW - RADIATOR GRILLE