Bumper Cover, Removing And Installing, A6, A7 SPORTBACK: Notes
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position. Refer to Removing => Disengage the side piece from the front side panel in direction of -arrow A- and remove the bumper cover -1- with the help of a second technician in direction of -B arrows-. .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending On The Version, The Following Additional Work Is Required: .
Special tools and workshop equipment required
- Engine Bung Set :VAS 6122