Potential Equalization Cable, Removing And Installing, Electric Drive Power And Control Electronics, AUDI A6/A7: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- After installing high-voltage components or potential equalization cables a potential equalization measurement must be performed on the applicable high-voltage components. Refer to POTENTIAL EQUALIZATION MEASUREMENT .
CAUTION:
There is a risk of fatal injury due to high voltage.
Electrocution by direct contact or electric arc can cause severe bodily injury or fatal injury.
- Have an Audi high-voltage technician or an Audi high-voltage expert bring the high-voltage system back into service.
-- Re-energize the high-voltage system. Refer to HIGH-VOLTAGE SYSTEM, RE-ENERGIZING .