Overview - Cover And Cushion, Sport Bench Seat
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Frame
- With the molded piece
- Upholstery Clip
- For securing the cover to the cushion
- Replace
- Install at the same location with Upholstery Clip Pliers :V.A.G 1634 .
- Wire
- Encapsulated in cushion
- For securing the cover to the cushion
- Contour Wire
- Sewn into cover
- For securing the cover to the cushion
- Cover
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .
- Check that there are no folds after installing
- Molding
- Sewn into cover
- For engaging the cover to the seat frame
- Make sure it fits correctly in the seat frame
- Clamping Strip
- Sewn into cover
- For attaching the cover to the seat frame
- Flip over 180° and engage in the groove on the molded piece. Refer to Installing .
- Clip
- Cushion
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .