Overview - Bumper Cover, A4 ALLROAD, Before Product Improvement

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bumper Cover & Grill (A4 Allroad, Before Product Improvement)

Courtesy of AUDI OF AMERICA, LLC

Bumper Cover Side Panel
- Right
- Removing and Installing. Refer to BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
- Threaded connection only at the top and bottom
- Tightening specification Refer to OVERVIEW - RADIATOR GRILLE .
Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE .
Bumper Cover Side Panel
- Left
- Removing and Installing. Refer to BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .
Mount
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Bolt
- 4 Nm
Nut
- Quantity: 2
- 4 Nm
Bolt
- Quantity: 2
- 2 Nm
Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Air Duct
- Side
- Removing and Installing. Refer to AIR ROUTING, REMOVING AND INSTALLING .
Mount
- For adaptive cruise control (ACC)
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - ADAPTIVE CRUISE CONTROL (ACC) .
Expanding Rivet
Bolt
- Quantity: 3
- Tightening specification Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
Front Spoiler
- Removing and Installing. Refer to FRONT SPOILER, REMOVING AND INSTALLING, A4 ALLROAD BEFORE PRODUCT IMPROVEMENT .
Air Intake Grille
- Side
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING .
Air Intake Grille
- At the bottom on the side
- Removing and Installing. Refer to LOWER SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING .
End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING .
Impact Guard
- Removing and Installing. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
- Tightening specification Overview - Covers and Air Guides .
Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4 ALLROAD BEFORE PRODUCT IMPROVEMENT .
Towing Eye Cover