Component Location Overview - Adaptive Cruise Control (Acc)
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Retaining Plate
- Bolt
- Quantity: 3
- 2.5 Nm
- Clip
- Closed version
- Cannot be removed without being damaged
- Note the installation position
- Clip
- Open version
- Cannot be removed without being damaged
- Stud Bolt
- Quantity: 3
- Note the adjustment dimension. Refer to Installing => .
- Clip
- Quantity: 3
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Distance Regulation Control Module
- Right: Control Module for Adaptive Cruise Control -J428-
- Left: Control Module 2 for Adaptive Cruise Control -J850-
- Removing and installing. Refer to CONTROL MODULES FOR ADAPTIVE CRUISE CONTROL -J428- /Control Module 2 for Adaptive Cruise Control -J850-, REMOVING AND INSTALLING .
- Calibrate the adaptive cruise control (ACC). Refer to appropriate Repair Information
- Operating Lever for Adaptive Cruise Control
- Shared component with the steering column switch module. Cannot be replaced separately
- Removing and installing. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .
- Instrument Cluster
- With Instrument Cluster Control Module -J285-
- Front Bumper
- Clip
- Open version
- Cannot be removed without being damaged