Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the connector -1-.

Fig 1: Secondary Air Injection Pump Motor -V101- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Press both of the release buttons -2 to 3- and remove the lines from the Secondary Air Injection Pump Motor -V101-.

-- Remove the nuts -arrows- and remove the Secondary Air Injection Pump Motor -V101- with the bracket.