Coolant Pipe On Transmission, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A3 Quattro and 2024 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Free up the wiring harness.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm:3094 .

Fig 1: Coolant Pipe On Transmission - Tightening Specification

Courtesy of AUDI OF AMERICA, LLC

-- Place a cloth underneath to catch leaking coolant.

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the bolt -1- and the nut -2- and then remove the coolant pipe.