Overview - Hood

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Hood

Courtesy of AUDI OF AMERICA, LLC

Clip
- For the insulation
- Quantity: 2
Insulation
- Removing and installing. Refer to INSULATION, REMOVING AND INSTALLING .
Impact Guard
- Removing and installing. Refer to IMPACT GUARD, REMOVING AND INSTALLING .
Hinge
- Right
- Removing and installing. Refer to HINGE, REMOVING AND INSTALLING .
Gas-Filled Strut
- Removing and installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
Hood
- Removing and installing. Refer to HOOD, REMOVING AND INSTALLING .
- Adjusting. Refer to HOOD, ADJUSTING .
Adjusting Buffer
- Adjusting. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
Striker
- Removing and installing. Refer to STRIKER, REMOVING AND INSTALLING .
- Adjusting. Refer to SIDE AND HEIGHT ADJUSTMENT AT STRIKER .
Nut
- Quantity: 2
- 9 Nm
Nut
- Quantity: 2
- 21 Nm
Hinge
- Left
- Removing and installing. Refer to HINGE, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 21 Nm