Height, Adjusting Using Adjusting Buffer
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .
Special tools and workshop equipment required
Procedure
-- Before adjustment of the hood -2- completely install the adjusting buffer -1-.
-- Remove the adjusting buffer until the closed hood lays with a light pretension on the lock carrier.
-- Check if the hood is without play and in a flush position by pressing or pulling on it.
-- Repeat the adjustment if necessary.