Side Adjustment at Striker:
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the nuts -1-.
-- Move the striker -2- -arrows-.
- During the closing test, the lid must fall from the balance position into the hood latch and engage completely.
-- Tighten the nuts.
Tightening Specifications
- Refer to OVERVIEW - HOOD