Height Adjustment at Striker:
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the adjusting buffer completely. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
-- Adjust the striker -1- by turning the adjusting screw -2- -arrows-.
- During the closing test, the lid must fall from the balance position into the hood latch and engage completely.
-- Adjust the striker height if necessary.