Wheel Bearing Unit, Removing And Installing, AWD: Removing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the outer drive axle threaded connection. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .
-- Remove the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .
-- Remove the bolts -arrows-.
-- Remove the wheel bearing unit from the wheel bearing housing and from the drive axle.
- Handling the wheel bearing. Refer to the graphic under OVERVIEW - WHEEL BEARING, FWD WITH TORSION BEAM AXLE .