Right Drive Axle, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Apply a thin coat of assembly paste to the splines on the outer joint before installing the outer joint in the wheel hub. Refer to the => Electronic Parts Information (ETKA).
-- Install the ball joint. Refer to BALL JOINT, REMOVING AND INSTALLING .
-- Vehicles without electronic damping: perform the basic setting of the Matrix LED headlamps after installing. Use the => .
-- On vehicles with electronic damping perform the basic setting of the electronic damping after installing. Refer to ELECTRONIC DAMPING BASIC SETTING .