Seat Depth Adjuster Heating Element, Removing And Installing
The old seat heating element remains on the cushion and will be covered by the new heating element.
Procedure
Conditions
- Cover and cushion separated. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING .
-- Cut the wire directly on the old heating element.
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
Further installation is performed in reverse order of the removal.