Cover, Separating From Seat Pan Cushion: Removing

-- Remove the seat pan cover and cushion. Refer to Seat Pan Cover and Cushion, Removing and Installing  .

-- Remove the cover -2- from the cushion -1- and cut upholstery clips -arrows- using pliers.

Courtesy of AUDI OF AMERICA, LLC

-- Cut through the remaining upholstery clips.

Vehicles with seat depth adjuster

-- Disengage the contour wire on the left and right side from the hooks -A arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Using the Hook Tool:T40207  , disengage the cover clamping strip from the hooks -B arrows-.

-- Disengage the rear clamping strip on the cover from the seat depth adjuster.

Courtesy of AUDI OF AMERICA, LLC

-- Pull the support -1- all the way out -arrows-.

-- Release the catches -2- and remove the support from the cushion base -3-.

-- If equipped, guide the wiring harness through.

-- Disengage the cover contour wire -arrows- from the hooks -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the front clamping strip -3- on the cover from the baseplate.

-- Unclip the clips -2- for the seat depth adjuster cushion -4- from the baseplate -5-.

Continuation for all vehicles