Overview - Rear Lid Tail Lamps
- Side Cover
- Refer to Rear Lid Tail Lamp, Removing and Installing .
- Seal
- Mount
- Seal
- Center Tail Lamp -MX13-
- With integrated Left License Plate Lamp -X4-, Right License Plate Lamp -X5-
- Components cannot be replaced separately.
- Replace the tail lamp completely if one of the components is faulty
- Refer to Rear Lid Tail Lamp, Removing and Installing .
- Nut
- Quantity: 6
- Tightening specification and sequence. Refer to Fig 1.
Tightening specification and sequence for the tail lamps
| Step | Component | Tightening Specification |
|---|---|---|
| 1. | -1- through -6- | Install all the way by hand |
| 2. | -1- through -6- | 4 Nm |