Outer Rear Seat Belt Guide, Removing And Installing: Removing
-- Move the front seats all the way forward.
-- Press the seat belt guide trim -1- out of the retainers -2- and -3- using the Trim Removal Wedge :3409 and remove the trim.
-- Remove the side cushion. Refer to OVERVIEW - COVER AND CUSHION .
-- Remove the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM / LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITH HIGH-VOLTAGE SYSTEM .
-- Remove the D-pillar trim panel. Refer to D-Pillar Trim Panel, Removing and Installing .
-- Lower the headliner and lay it on the seats. It is not necessary to remove it from the vehicle. Refer to Headliner, Lowering .
-- Remove the C-pillar trim panel. Refer to C-Pillar Trim Panel, Removing and Installing .
-- Remove the seat belt webbing from the seat belt guide -1-.
-- Remove the bolt -arrow-.
-- Disengage the seat belt guide -1- from the mount and remove.
-- If equipped, on the right side of the vehicle: disconnect the connector for the parking aid warning buzzer.