Parking Lock Emergency Release Cable, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Make sure that the distance between the emergency release cable -2- and lever -1- is maintained.
- Dimension -a- = minimum 1 mm.
- Dimension -b- = minimum 1 mm.
-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
-- Check the parking lock emergency release. Refer to EMERGENCY RELEASE FROM P .