Securing On Engine And Transmission Holder

WARNING: This page is about a different car, the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Holding Plate:VW309A
Engine and Gearbox Bracket:VAS6095A

Procedure

Fig 1: Identifying Support Tool 3311, Bolt 3311/1 And Holding Plate VW 309

Courtesy of AUDI OF AMERICA, LLC

Hold the transmission with the :VAS6100 . Refer to TRANSMISSION, TRANSPORTING .

-- Attach the :VW309A to the :3311 .

-- Insert the transmission in the :VAS6095A using the :VAS6100 .

The vents for the transmission housing and final drive must be closed before turning a filled transmission with ATF pan upward on the engine/transmission holder.