Overview - Windshield Projection (Head-Up Display)

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI OF AMERICA, LLC

1. Exterior Bracket
   • Must not be removed
2. Nut
   • must not be loosened
   • Quantity: 3
3. Windshield Projection Head Up Display Control Module -J898-
   • Refer to appropriate Servicce Information .
4. Bolt
   • Quantity: 2
   • Replace after removing
   • Refer to Fig 2
5. Expanding Rivet
6. Air Duct
7. Instrument Panel
8. Clip
9. Upper Cover
   • Refer to OVERVIEW - INSTRUMENT PANEL .
10. Expanding Rivet
11. Bolt
    • Refer to Fig 2
12. Bolt
    • Quantity: 2
    • Replace after removing
    • Refer to Fig 2
13. Instrument Panel Crossmember
14. Nut
    • must not be loosened
    • Quantity: 3
15. Interior Bracket
    • Must not be removed

Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence

Fig 2: Windshield Projection Head Up Display Control Module - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC