Heater Core Heat EXCHANGER, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Hose Clamps - Up To 25 mm:3094

Fig 1: Hose Clamps
Courtesy of AUDI OF AMERICA, LLC
Engine Bung Set:VAS6122

Fig 2: Engine Bung Set
Courtesy of AUDI OF AMERICA, LLC
Hose Clip Pliers:VAS6362

Fig 3: Hose Clip Pliers
Courtesy of AUDI OF AMERICA, LLC
Shop Crane - Drip Tray:VAS6208

Fig 4: Identifying Drip Tray
Courtesy of AUDI OF AMERICA, LLC

For all the following work, close the open lines and connections with clean plugs from the Engine Bung Set:VAS6122 .