Expansion Valve, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

For all following procedures immediately seal all the open lines and connections with clean plugs from the Engine Bung Set:VAS6122 .

-- Disconnect the refrigerant lines -B and C- from the front expansion valve -D- and put aside (do not remove). Refer to REFRIGERANT LINES, REMOVING AND INSTALLING FROM EXPANSION VALVE .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -A-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the expansion valve -B- from the refrigerant lines to the evaporator.