LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Final Drive, Differential (Rear Final Drive 0D2, 0D3, 0DB, 0B0, 0BX, 0DG, 0G2, 09R) (Coupe)) >> 39 Final Drive, Differential >> Final Drive >> Final Drive, Disassembling And Assembling >> Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra" >> Installing

Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra": Installing

WARNING: This page is about a different variant/trim than selected.
GWWA39-10865Courtesy of AUDI OF AMERICA, LLC

-- Insert the Speed Sensor -- -2- and tighten the bolt -3-. Tightening specification  OVERVIEW - FINAL DRIVE, DISASSEMBLING AND ASSEMBLING, 0B0 "quattro ultra", 09R "quattro ultra" List Item:Bolt.

-- Connect the connector -1-.

GWWA39-10864Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals