All-Wheel Drive Clutch Output Shaft Seal, Replacing: Removing
WARNING: This page is about a different variant/trim than selected.
- All wheel drive clutch is installed.
- The ignition is off.
- Pay attention to the general repair information. Refer to REPAIR INFORMATION .
-- Remove the driveshaft. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
-- Draining the ATF for the all-wheel drive clutch. Refer to ALL-WHEEL DRIVE CLUTCH OIL, DRAINING AND FILLING .
-- Pry off the dust ring -1-.
- The dust ring cannot be removed without destroying it.
-- Pry out the seal -1- for the all-wheel drive clutch output shaft using the Puller - Crankshaft/Power Steering Seal:T20143/2 .