Engine, Removing From Scissor Lift Table, 3.0L Engine
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Lifting Tackle:3033
- Shop Crane:VAS6100
- Lift Arm Extension:VAS6101
- Scissor Lift Table:VAS6131B
Procedure
- Engine/transmission assembly removed and separated on :VAS6131B . Refer to ENGINE AND TRANSMISSION, SEPARATING, 3.0L ENGINE .
WARNING:
Risk of accident!
- The engine may only be transported in the manner described and without the transmission.
-- Attach the :VAS6101 to the :VAS6100 .
-- Engage the :3033 on the engine lifting eyes and on the shop crane as shown.
-- Pry up the engine with the workshop crane.