Overview - Transmission Mount for Automatic Transmission, Audi A8
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Side Transmission Mount
- with
- Transmission Mount Valve 1 -N262- right
- Transmission Mount Valve 2 -N263- left
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- with
- Bolt
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Side Transmission Support
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Tunnel Crossmember
- Removing and Installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Rear Transmission Support
- Removing and Installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING, VERSION 1 .
- Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Rear Transmission Mount
- Removing and Installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING, VERSION 1 .
- Stop
- For the transmission mount
- Not Installed
- Not Installed
- Nut
- Tightening specifications. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- 9 Nm
- Bracket
- For the connectors
- Heat Shield
- Bolt
- 9 Nm
- Bolt
- 20 Nm