Overview - Assembly Mounts
WARNING: This page is about a different variant/trim than selected.
- Bolt
- 70 Nm
- Tunnel Crossmember
- Removing and Installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
- Stop
- For the transmission mount
- Transmission Mount
- Removing and Installing. Refer to the appropriate Service Information .
- Transmission
- Nut
- 20 Nm
- Transmission Support
- Removing and Installing. Refer to the appropriate Service Information .
- Bolt
- 40 Nm
- Bolt
- 20 Nm +90°
- Replace after removing
- Nut
- 20 Nm