Overview - Dual Clutch Transmission Mount, Version 2
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Tunnel Crossmember
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Stop
- For the transmission mount
- Transmission Mount
- Removing and Installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING, VERSION 2 .
- Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Transmission Support
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Nut
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .